Ask Your Question
1

What is a prepreg?

asked 2016-05-10 20:37:34 -0500

Conrad_Marr gravatar image

What is a prepreg?

edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted
0

answered 2016-05-30 02:46:17 -0500

updated 2016-05-30 10:33:04 -0500

"Prepreg" stands for "pre-impregnated" where the composite reinforcement is wetted out with resin in the correct ratio. It must then be stored in a freezer so that it doesn't cure before use in manufacturing.

Thermoset prepregs are most commonly used in prepreg composite manufacturing. The primary resin matrix used is epoxy. However, other thermoset resins are made into prepregs including BMI and phenolic resins.

With a thermoset prepreg, the thermosetting resin starts as a liquid and fully impregnates the fiber reinforcement.

Excess resin is precisely removed from the reinforcement. Meanwhile, the epoxy resin undergoes a partial curing, changing the state of the resin from a liquid to a solid. This is know as the "B-stage."

In the B-stage, the resin is partially cured, and usually tacky. When the resin is brought up to an elevated temperature, it often returns briefly to a liquid state prior to hardening completely.

Once cured, the thermoset resin which was in the b-stage, is now fully cross-linked.

Advantages of Prepregs

Perhaps the greatest advantage of using prepregs is their ease of use. For example, say one is interested in manufacturing a flat panel out of carbon fiber and epoxy resin. If they were to use liquid resin in a closed molding or open molding process, they would be required to obtain a fabric, the epoxy resin, and the hardener for the epoxy. Most epoxy hardeners are considered hazardous, and dealing with resins in a liquid state can be messy.

With an epoxy prepreg, only one item needs to be ordered. An epoxy prepreg comes on a roll and has the desired amount for both resin and hardener already impregnated in the fabric.

Most thermoset prepregs come with a backing film on both sides of the fabric to protect it during transit and preparations. The prepreg is then cut to the desired shape, the backing is pealed off, and the prepreg is then laid into the mold or tool. Both heat and pressure are then applied for the specified amount of time. Some of the most common types of prepregs take an hour to cure, at around 250 degrees F, but different systems are available at both lower and higher cure temperatures and times.

Disadvantages of Prepregs

Shelf Life Since the epoxy is in a B-stage, it is required to be stored either refrigerated or frozen prior to use. Additionally, the overall shelf life can be low.

Cost Prohibitive When manufacturing composites through a process such as pultrusion or vacuum infusion, the raw fiber and resin are combined on site. However, when using prepregs, the raw material must first be prepregged. This is most often done off-site at a specialized company that focuses on prepregs. This added step in the manufacturing chain can add increased cost, and in some instances close to double the material cost.

Ref: http://composite.about.com/...

edit flag offensive delete link more

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

Question Tools

1 follower

Stats

Asked: 2016-05-10 20:37:34 -0500

Seen: 233 times

Last updated: May 30 '16